Table of Contents
Advertisement
4) n&9pin : Enter basic menu item "257 : NETWORK ENA", and select "network & remote
(9PIN)".
5) Free mode : Enter basic menu item "036 : FILE NAMING", and select "free" for "NAMING
FORM".
6) Specification of national date and time.
Enter MAINTENACE MENU.
Level 1 : OTHERS
Level 2 : DATE/TIME PRESET - - - - - Set YEAR, MONTH, DAY, TIME.
7) Recording USER DATA (GENERAL)/Recording PROAV (SINGLE ESSENCE)
Enter MAINTENANCE MENU.
Level 1 M3 :
OTHERS
Level 2 M33 : FILE I/F CONFIG - - - - - Set PROAV DISPLAY to ena.
8) Recording SD and HD together on one disc
Enter MAINTENANCE MENU.
Level 1 M3 :
OTHERS
Level 2 M39 : OTHER CONFIG
Level 3 M390 : Set MIXED REC to ena.
9) Set the toggle switch on the left of the control panel to REMOTE.
PDW-F70, PDW-F75
1) Setting the line mode
Enter SYSTEM MENU.
Level 1: SETUP MENU
Level 2: →OPERATIONAL FUNCTION
→SYSTEM SEL
Level 3:
→SYSTEM FREQ (UC/J,23.98PsF) - - - - - →It selects.
Level 4:
→60I/50I/30P/25P - - - - - →It selects.
Level 5:
After setting, turn off the power of cart, and turn on again.
2) Setting the IP Address
Enter SYSTEM MENU.
Level 1: SETUP MENU
Level 2: →INTERFACE SELECT
→(DHCP DISABLE)
Level 3:
→IP ADDRESS - - - - - Set the IP Address.
Level 4:
After setting, be sure to turn off the power of cart, and to turn on again.
3) Enable the extended menu display
Enter SYSTEM MENU.
Level 1: SYSTEM MENU
Level 2: →MENU GRADE : BASIC
→Set ENHANCED
Level 3:
4) n&9pin: SYSTEM MENU
Level 1: →SETUP MENU
→INTERFACE SELECT
Level 2:
→NETWORK ENABLE
Level 3:
→NETWORK & RS-422A
Level 4:
5) free mode: SYSTEM MENU
Level 1: →SETUP MENU
→OPERATIONAL FUNCTION
Level 2:
→FILE NAMING
Level 3:
→NAMING FORM
Level 4:
Level 5:
5-8 (E)
→free
PDJ-A640 IM
Advertisement
Table of Contents
