Table of Contents
Advertisement
1. Rotate the leveling feet on the bottom of the machine
in the direction of the arrow until they reach the
ground. Rotate the hex-head bolts with a spanner
wrench to raise the machine until the spacers can be
removed.
Spacer
Hex-head bolt
Leveling foot
2. Remove the two spacers.
PDJ-A640
Spacers
1-2 (E)
3. Raise the leveling feet until the casters reach the
ground. Continue rotating the leveling feet until they
reach the upper-most positions.
4. Attach the slope to the bottom tray and engage the
fixing hook with the loop on the slope.
Fixing hook
Slopes
5. Bring down the PDJ-A640 from the bottom tray using
the slopes.
Casters
Hex-head bolt
Leveling foot
PDJ-A640
Bottom tray
PDJ-A640 IM
Advertisement
Table of Contents
