Download Print this page
TSI Instruments Aerotrak 9303 Quick Start Manual
TSI Instruments Aerotrak 9303 Quick Start Manual

TSI Instruments Aerotrak 9303 Quick Start Manual

Handheld airborne particle counter
Hide thumbs Also See for Aerotrak 9303:

Advertisement

Quick Links

AIRBORNE PARTICLE COUNTER
Thank you for purchasing a TSI AeroTrak
Handheld Airborne Particle Counter (particle counter).
This guide will help you quickly begin using your particle
counter.
More detailed information is in the manual located on
the included TrakPro™ Lite Secure Software CD.
Please refer to the Operation Manual if you have
questions on the operation of your new particle counter.
Safety
This section gives instructions to promote safe and
proper handling of the AeroTrak
Particle Counters.
I M P O R T A N T
There are no user-serviceable parts inside the
instrument. Refer all repair and maintenance to a
qualified factory-authorized technician. All
maintenance and repair information in this manual is
included for use by a qualified factory-authorized
technician.
L A S E R S A F E T Y
The Model 9303 Handheld Airborne Particle Counter
is a Class I laser-based instrument. During normal
operation, you will not be exposed to laser radiation.
However, precaution should be taken to avoid
exposure to hazardous radiation in the form of
intense, focused, visible light. Exposure to this light
may cause blindness. DO NOT remove any parts
from the particle counter unless you are specifically
told to do so in this manual. DO NOT remove the
housing or covers. There are no user-serviceable
components inside the housing.
The use of controls, adjustments, or
procedures other than those specified
in this manual may result in exposure
to hazardous optical radiation.
QUICK START GUIDE
AEROTRAK
®
Model 9303
®
Handheld Airborne
HANDHELD
®
MODEL 9303
W A R N I N G
The battery supplied by TSI (700019) has built in
protection against explosion and fire hazard. Do not
use a substitute. Do not use non-rechargeable
batteries in this instrument. Fire, explosions, or other
hazards may result.
Labels
Advisory labels and identification labels are attached to
the outside of the particle counter housing and to the
optics housing on the inside of the instrument.
1. Serial number label
(back panel)
2. Laser radiation label
(internal)
3. Laser radiation
symbol label
(internal)
3. European symbol
for non-disposable
item. Item must be
recycled.
Unpacking
1. Carefully unpack the particle counter from the
shipping container and verify that all the items listed
in the following table are present.
2. Contact TSI immediately if items are missing or
broken.
DANGER!
INVISIBLE LASER RADIATION
WHEN
OPEN. AVOID DIRECT
EXPOSURE TO BEAM
WARNING: NO USER SERVICABLE
PARTS INSIDE. REFER SERVICING
TO QUALIFIED PERSONNEL

Advertisement

loading
Need help?

Need help?

Do you have a question about the Aerotrak 9303 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for TSI Instruments Aerotrak 9303

  • Page 1 QUICK START GUIDE AEROTRAK HANDHELD ® AIRBORNE PARTICLE COUNTER MODEL 9303 Thank you for purchasing a TSI AeroTrak ® Model 9303 W A R N I N G Handheld Airborne Particle Counter (particle counter). The battery supplied by TSI (700019) has built in This guide will help you quickly begin using your particle protection against explosion and fire hazard.
  • Page 2 3. Additional items may be included if you ordered Item Part/ accessories or spare parts. Description Model Reference Picture AeroTrak ® 9303-01 Power Airborne Particle 1. The battery is shipped separately and has to be Counter installed before use. 2. Remove the battery cover on the back side of the handle with a screwdriver and connect the battery to the socket.
  • Page 3 Navigating Menus 1. You can move between settings on the sub menus with the Up/Down arrow keys. If a setting has two or more values, use the Left and Right Soft Keys (under < and >) to cycle between values. 2.
  • Page 4 5. Press ESC twice to return to the Main Screen. Checking Flow 1. Periodically check the inlet flow of the instrument UTILITY MENU with an external flow meter standard. Pump Speed 2. Connect a flowmeter standard to the inlet and turn Data Logging on the instrument.