Device Management; Connecting A Ruggedcom Win Subscriber Station - Siemens SIMATIC NET Installation Manual

Device Management

This section describes how to connect to and manage the device.
3.1

Connecting a RUGGEDCOM WIN Subscriber Station

The RUGGEDCOM RP100 is designed to be a Power-over-Ethernet (POE) injector for
RUGGEDCOM WIN5000 series subscriber stations.
IMPORTANT
If the RUGGEDCOM RP100 is to be installed outdoors, make sure the connection
between both devices is bridged by a suitably rated lightening protector. For more
information, refer to
To connect a RUGGEDCOM WIN subscriber station to the device, do the following:
•
RUGGEDCOM RP100
Installation Manual, 01/2021, C79000-G8976-1011-05
"Installing the Device Outdoors (Page
Connect a CAT-5e cable between the ETH/PWR port on the subscriber station
and the 10/100Base-TX PoE port on the RUGGEDCOM RP100.
3
8)".
13