Required Tools And Materials; Decommissioning And Disposal - Siemens SIMATIC NET Installation Manual

Power Supply Terminal Block
POWER LED
Copper Ethernet Ports
Chassis Ground Terminal
1.2

Required Tools and Materials

The following tools and materials are required to install the RUGGEDCOM RP100:
AC or DC power cord (16 AWG)
CAT-5 Ethernet cables
Flathead screwdriver
1.3

Decommissioning and Disposal

Proper decommissioning and disposal of this device is important to prevent malicious
users from obtaining proprietary information and to protect the environment.
Decommissioning
This device may include sensitive, proprietary data. Before taking the device out of
service, either permanently or for maintenance by a third-party, make sure it has
been fully decommissioned.
For more information, refer to the associated Configuration Manual.
Recycling and Disposal
For environmentally friendly recycling and disposal of this device and related
accessories, contact a facility certified to dispose of waste electrical and electronic
equipment. Recycling and disposal must be done in accordance with local
regulations.
RUGGEDCOM RP100
Installation Manual, 01/2021, C79000-G8976-1011-05
A pluggable terminal block. For more information, refer to
"Connecting Power (Page 10)"
(Page 17)"
Illuminates when power is being supplied to the device.
Receive and transmit data, as well as provide power to a
RUGGEDCOM WIN subscriber station. For more information, refer to
"Communication Ports (Page
Protects the device from power surges and accumulated static
electricity. For information about grounding the device, refer to
"Grounding the Device (Page
Tools/Materials
1.2 Required Tools and Materials
and "Power Supply Specifications
15)".
9)".
Purpose
For connecting power to the device.
For connecting the device to the network.
For mounting the device to a DIN rail.
Introduction
3