Siemens SIMATIC NET Installation Manual page 32

a
Shielded cable used.
IEEE 1613 EMC Immunity Type Tests
Note
The RUGGEDCOM RP100 meets Class 2 requirements for an all-fiber configuration
and Class 1 requirements for copper ports.
Fast Transient
Dielectric Strength
a
Shielded cable used.
Environmental Type Tests
IEC 60068-2-1
IEC 60068-2-2
IEC 60068-2-6
IEC 60068-2-27
RUGGEDCOM RP100
Installation Manual, 01/2021, C79000-G8976-1011-05
Test
Description
ESD
Radiated RFI
Oscillatory
HV Impulse
Test
Cold Temperature
Dry Heat
6.2 EMC and Environmental Type Tests
Description
AC Power
Ports
Enclosure Contact
Enclosure Air
Enclosure Ports
Signal Ports
DC Power Ports
AC Power Ports
Earth Ground Ports
Signal Ports
DC Power Ports
AC Power Ports
DC Power Ports
AC Power Ports
DC Power Ports
AC Power Ports
Description
Test Ad
Test Bd
Vibration
Shock
Certification
Test Levels
5 kV
Test Levels
± 8 kV
± 15 kV
35 V/m
± 4 kV @ 2.5 kHz
± 4 kV
± 4 kV
± 4 kV
2.5 kV Common Mode @ 1 MHz
2.5 kV Common and
Differential Mode @ 1MHz
2.5 kV Common and
Differential Mode @ 1MHz
1.5 kVDC
2 kVAC
5 kV
5 kV
Test Levels Severity Levels
-40 °C (-40
°F), 16 Hours
85 °C (185
°F), 16 Hours
2 g @ 10-150 Hz
30 g @ 11 ms
Severity
Levels
a
a
Class 2
Class 2
23