Horizon Fitness CE4.1 User Manual page 9

A S S E M BLY S T E P 3
PEDAL ARM
A ) Open HARDWARE BAG FOR STEP 3.
B) Align the bracket on the LEFT LOWER LINK ARM with the tube on the LEFT PEDAL ARM.
C) Slide the SPACER (D) through the LINK ARM BRACKET and the PEDAL ARM so it can't rotate.
D) Insert 2 TEFLON WASHERS (E) between the PEDAL ARM and the LINK ARM BRACKET.
E) Secure the joint with a FLAT WASHER (F) and BOLT (G).
F) Repeat on the other side.
HARDWARE BAG FOR STEP 3 CONTENTS :
SPLIT TEFLON WASHER (E)
30 mm
Qty: 4
TEFLON WASHERS (E)
FLAT WASHER (F)
BOLT (G)
LINK ARM BRACKET
SPACER (D)
LOWER LINK ARM
BOLT (G)
15 mm
Qty: 2
PEDAL ARM TUBE
SPACER (D)
70 mm axis
Qty: 2
FLAT WASHER (F)
35 mm
Qty: 2
9