Installation; Electrical Connection - IKEA MATMASSIG Manual

ENGLISH
Problem
lights up on the timer
display.
You can hear a constant
beep noise.
If there is an error, first try to find a solution
to the problem yourself. If you cannot find a
solution to the problem yourself, contact
your IKEA store call centre. You can find a
full list of IKEA appointed contacts at the
end of this manual.

Installation

Warning! Refer to Safety
chapters.
General information
Installation process must follow
the laws, ordinances, directives
and standards (electrical safety
rules and regulations, proper
recycling in accordance with the
regulations, etc.) in force in the
country of use!

Electrical connection

Warning! Refer to Safety
chapters.
Possible cause
The electrical connection is
incorrect. The hob is connec-
ted to one phase only.
Electronics may be dam-
aged.
The electrical connection is
incorrect.
Important!
• For the minimum distances from the other
• If there is no oven beneath the hob insert
• Do not use silicon sealant between the
Check if the appliance is cor-
rectly connected to the elec-
trical supply. Ensure a cor-
rect installation by calling an
authorised installer.
Contact your IKEA store call
centre.
Disconnect the hob from the
electrical supply. Ensure a
correct installation by calling
an authorised installer.
If you operated the appliance
wrongly, or the installation was
not carried out by a registered
engineer, the visit from the After
Sales Service technician or
dealer may not take place free
of charge, even during the
warranty period.
appliances or cabinets and further
information on the installation refer to
the Assembly Instruction.
a dividing panel at a minimum distance
of 20 mm from the bottom of the hob.
appliance and the worktop.
40
Remedy