Table of Contents
Advertisement
(c) Press " ".
(d) Select Show On/Off and press "
(e) Move the marked field to "ˇ" and press "
Note: you may pick up more than one tracking logs to display at the same time.
(v) Edit
Return to the page as Fig. 5-3-1 to do as follows:
(a) Move the marked field to saved track logs and press "
(b) Select the tracking log to be edited and press "
(c) Press " ".
(d) Select Edit and press "
tracking log as Fig. 5-3-4.
(e) Please follow the instructions as editing waypoints in P.23.
(f) Move the marked field to "ˇ" and press "
(vi) Recording Mode
Set your parameters to record track logs. Return to the page as Fig. 5-3-1 to do as follows:
(a) Press " ", select Recording Mode and press "
(b) Operation details are the same as Start to track in page 26.
IV. Power Saving Mode
A. Power Saving ON
Select Pw Saving Mode and press "
signals
well, it works in power saving mode automatically. Otherwise it may turn this function
off to
get better acquisition to satellites. When receiving condition improved, it will return to
power
saving mode again.
B. Power Saving OFF
Select Pw Saving Off and press "
mode to
have better satellite acquisition when outsourcing power.
V. UPLOAD
This function is for saving all waypoints & routes and Track Logs from
Explorer
PC for later use. You may share these data with your friends via email.
into a
" to display/hide..
" or press " " to return to former page.
". You may see the name and number of the points of this
".
". If the
Explorer
" to have
".
".
".
Explorer
receives satellite
work in continuous
31
Advertisement
Table of Contents
