Table of Contents
Advertisement
(i) Move the cursor " " to the objective in map page.
(ii) Press and hold "
(iii) Follow the steps as Method 1.
(iv) The time and date is your present one.
Note: If you have not changed the coordinate, the waypoint you created is:
(a) Method 1: At present address at " ".
(b) Method 2: At the cursor " " in the map. If there is no cursor in the map, it is at " ".
C. Edit Waypoints
(i) Go back to previous page or go to Waypoints from main menu as Fig. 5-1-3.
(ii) Move the marked field to the list of waypoints and press "
(iii) Select the waypoint to be edited, press "
(iv) Press " ", select Edit and press "
(v) Go step by step as creating a new waypoint.
D. Delete Waypoints
(i) Go back to previous page or go to Waypoints from main menu as Fig. 5-1-3.
(ii) Move the marked field to the list of waypoints and press "
(iii) Select the waypoint to be deleted, press "
(iv) Press " ", Select Delete and press "
(v) Press " " to go back to former page.
E. Delete All
(i) Go back to previous page or go to Waypoints from main menu as Fig. 5-1-3.
(ii) Press " ", select Delete All and press "
be
deleted.
Note! (a) The waypoint is undeletable once it is edited into a route.
(b) Once a Waypoint is edited into a route, "＊" will show at right side of the name of
the waypoint.
(c) The name of deleted waypoint will not appear again in the system unless you edit
a new one and name it again.
(d) When complete, you must turn off
will be saved in the system.
" for one second to turn the page as Fig. 5-1-5.
" as Fig. 5-1-5.
".
".
".
". All waypoints not edited into a route will
Explorer
. Then all waypoints you created
".
".
25
Advertisement
Table of Contents
