Basic Operation; Power On And Off; Charging Battery; Install/ Remove Microsd Card - Holux FunTrek 132 User Manual

Basic Operation

Power on and off

When device is turned on, press and hold the right button for 3 seconds to power off the device. The prompt
"Saving data... please wait." will appear while the device is powering off. When device is turned off, press and
hold the right button for 3 seconds to power on.
Note: Please do not power off the devices when you use the "Training" or "Area calculation" functions, the track
log can't be saved normally.

Charging Battery

You may choose one of the following methods to charge the device.
1. Connect the USB adapter to a wall outlet.
2. Connect the USB cable to your computer. For details, please refer to the
3. If the supplier includes with a car power adapter, plug the respective ends of the device to the card
cigarette lighter and the USB cable interface in order to charge the device.
Charging mode
Connect FunTrek 132 to the PC with an USB cable. When the device is power off and connect to the PC, enter
charging mode.

Install/ Remove microSD card

Step:
Open the battery lid and remove the battery.
1.
Insert microSD with its chip facing down and flat into the microSD slot and push upward to lock the
2.
microSD card slot.
To remove the microSD card, unlock the SD socket and remove the SD card.
3.
4
HOLUX FunTrek 132
charging mode