FIMI X8 MINI Operation Instructions Manual page 13

Flying Condition Requirement
1. Fly in an open field away from people, buildings, and sources of electromagnetic interference.
2. Fly below 5000 meters above sea level at ambient temperatures of 0-40 degrees Celsius.
3. Fly in areas allowed by local laws and regulations.
4. Please make sure that the ba ery and remote control of the drone are fully charged before flying.
5. When operating the drone indoors, it should be noted that some functions may not be available.
6. Please use the remote control a er turning off other wireless devices to avoid interference
to the remote control communication.
Product Inspection and Maintenance
Drone
1. Check the appearance of the drone for cracks and tightness of the screws.
2. Check the power bu on and whether the indicator is working properly.
3. Check whether there is deformation, looseness and cracks in the arm and leg frame, and
whether it is in a symmetrical position.
4. Check whether the drone cooling holes are blocked or covered.
Remote control
1. Check the appearance of the remote control for any damage and abnormal bu on function.
2. Check whether the operation of rocker bar, roller and antenna is smooth. If there is strong
clamping stagnation or friction, please contact the a er-sale service.
3. Charge once every three months to protect the ba ery life of the remote control.
4. If the remote control is replaced,the drone must pair RC again.
Ba ery
1. Check whether the ba ery appearance is damaged, bulged and leaking; If there is damage,
please replace the ba ery in time and properly handle the damaged ba ery.
2. Check whether the ba ery buckle is intact. A er loading into the drone, whether the ba ery
will shake and fall off.