Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS (Continued)
19. Replacement Parts
When replacement parts are
required, be sure the service
technician has used replacement
parts specified by the
manufacturer or have the same
characteristics as the original part.
Unauthorized substitutions may
result in fire, electric shock, or
other hazards.
(Replacement of the lamp only
should be made by users.)
20. Safety Check
Upon completion of any service or
repairs to this product, ask the
service technician to perform
safety checks to determine that
the product is in proper operating
condition.
21. Do not leave thermal-
paper documents or easily
deformed items on top of
the unit or near the air
exhaust for long periods
of time.
The heat from the unit could erase
the information on the thermal
paper, or cause deformation or
warping.
All manuals and user guides at all-guides.com
22. Do not use the product in
a closed installation state.
Do not place the product in a box
or in any other closed installation
state. Otherwise it may overheat.
This could result in a risk of fire.
8
POWER SUPPLY
If your line voltage is 220 to 240V, u
Plug
configuration Plug type
EURO
UK
Use a 5A fuse which is approved by
or BSI to BSI362.
Always replace the fuse cover after
changing the fuse.
IMPORTANT PRE
Save Original Packing
The original shipping carton and pa
ship your projector. For maximum p
the factory.
Moisture Condensatio
Never operate this unit immediately
When the unit is exposed to such a
the lens and the crucial internal par
use the unit for at least 2 hours whe
ture.
Place and Manner of In
• Do not place in hot locations, such
malfunction, and shorten the life of
• Avoid locations with oil or cigarette
shortening their lives, and darkenin
• Do not use this product in the uprig
level. Doing so may cause a failure
• Using this instrument near a TV or r
sound. If this happens, move it awa
• Moving the projector from a low-tem
cause condensation on the lens or
it in that situation, the malfunction m
naturally disappears.
• In a high altitude location where air
projector with [Fan mode] set to [H
Line
220
220
Advertisement
Table of Contents
