Table of Contents
Advertisement
Using handy features (Continued)
How to set password (from [Off] to [On])
1
Select [Password] in the Default setting 2 menu and press the
button.
2
Select [Password setting] in the password registration, setting menu,
and press the
or
3
Select [On].
4
Select [OK] and press the
The password entry screen is displayed.
5
Enter the password using numeric keys of the remote control.
6
The password setting will be set as [On].
How to operate when password is [On]
1
Turn on the power.
2
The lamp lights and the password entry screen appears.
3
Enter the password using numeric keys of the remote control.
If the entered password is correct, the start-up screen appears and the projector
goes into normal operation. If the password is wrong, a message appears to
prompt you to re-enter the password, and again the password entry screen is
displayed. If you enter a wrong password for more than 5 times, the projector will
automatically power off and enter standby mode.
All manuals and user guides at all-guides.com
button.
button.
32
How to set password (fro
1
or
Select [Password] in the
The password entry screen is
2
Enter the password usin
3
Select [Password setting
and press the
4
Select [OFF].
5
Select [OK] and press th
Note
• While the password setting is
only when the power is turned
button.
or
bu
Advertisement
Table of Contents
