Brother RJ-3230B User Manual page 214

Home > Appendix >
the Battery Using the 4-bay Active Docking Station
Charge the Battery Using the 4-bay Active Docking Station
The 4-bay Active Docking Station cannot recharge the printer's battery without being connected to an AC power
outlet using the AC adapter (PA-AD-600A).
>> Charge the Battery
>> Remove the Printer from the Docking Station
Charge the Battery
1. Connect the AC Adapter to the Docking Station's DC Connector.
2. Connect the AC power cord to the AC Adapter.
3. Connect the AC power cord to a nearby AC power outlet.
4. Align the Docking Station Terminals of the Docking Station and the printer.
1
5. Press the printer down and onto the Docking Station until the latches lock it firmly in place.
The printer's LED Indicator lights in orange when charging.
The printer's LED Indicator will turn off when charging is complete.
Remove the Printer from the Docking Station
• Push the Eject Button on the back of the Docking Station, lift the printer, and then remove it from the Docking
Station.
Optional Accessories
2
> 4-bay Active Docking Station (Optional:PA-4CR-003) > Charge
210