Table of Contents
Advertisement
•
Media Sensor (Transmissive/Gap)
-
Detection Sensitivity
Adjusts the sensitivity of gap (spacing) detection for die-cut labels.
-
Luminescence Adjustment
Adjusts the amount of light emitted by the transmissive/gap sensor.
•
Media Sensor (Reflective/Bar)
-
Mark Detection Sensitivity
Adjusts the sensitivity of black mark detection.
-
Luminescence Adjustment
Adjusts the amount of light emitted by the reflective/black mark sensor.
•
Media Sensor (Peeler)
Specifies the settings when the Label Peeler (optional) is used.
-
Detection Sensitivity
Adjusts the precision of the sensor that detects whether the label has been peeled.
Display Settings Tab
•
Clock
Sets the clock function.
•
Synchronize with SNTP server
Synchronizes time with the SNTP server.
•
Time Zone
Sets the time zone.
•
Set Clock
Sets the date and time.
•
LCD Contrast
Sets the contrast of the LCD.
•
Backlight Timeout
Sets the period of time before the backlight turns off if the printer is not used.
•
Beeper
Select whether the printer beeps when it is turned on or off, or if an error occurs.
Management Tab
To display this tab, you must have administrator privileges for the computer or the printer. Check if you have
administrator privileges for the printer by clicking the Printer properties menu, and then clicking the
Security tab.
•
Language
Specifies the language displayed on the LCD.
•
Airplane Mode (RJ-3250WB)
Allows disabling the Bluetooth or Wi-Fi interfaces. This function is useful when you use the printer in a place
where signal transmissions are not allowed.
•
Command Mode
Selects the command mode type.
Related Information
•
Change Printer Settings Using the Printer Setting Tool (Windows)
144
Advertisement
Table of Contents
