Table of Contents
Advertisement
2
1
1. Upper Tear Bar
2. Lower Tear Bar
CAUTION
Do not touch the Tear Bar blade.
•
The default [Tear Bar] setting is set to [Upward]. (When Linerless is set to On in the Advanced
tab of the Printer Setting Tool, the [Tear Bar] setting is not available.)
•
To adjust the cutting position, open the Printer Setting Tool, go to Print Position / Sensors in the
Device Settings, and then enter the setting you want in the Tear Adjust field. For more information,
see Related Topics.
Related Information
•
Set Up Your Printer
Related Topics:
•
Device Settings of the Printer Setting Tool (Windows)
28
Advertisement
Table of Contents
