Labels & Cosmetics - Shop fox M1117 Owner's Manual

M1117
101
WARNING! WARNING!
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.woodstockint.com
or call (360) 734-3482.
105
WARNING!
DO NOT REMOVE
GUARD!
108
REF PART # DESCRIPTION
101 XM1117101 MANUAL/EYE INJURY LABEL
102 XM1117102 MODEL NUMBER LABEL
103 XM1117103 AMPUTATION/LACERATION LABEL
104 XM1117104 TOUCH-UP PAINT, CAUTION YELLOW
Safety.labels.warn.about.machine.hazards.and.how.to.prevent.serious.personal.injury..The.owner.
of.this.machine.MUST.maintain.the.original.location.and.readability.of.all.labels.on.this.machine..
If.any.label.is.removed.or.becomes.unreadable,.REPLACE.that.label.before.allowing.machine.to.
be.operated.again..Contact.us.at.(360).734-3482.or.www.woodstockint.com.to.order.new.labels..
Labels.&.Cosmetics
107
52" SHEET METAL SHEAR
Specifications
Max. Stock Width: 52" To reduce risk of serious injury while using this machine:
Max. Thickness, Mild Steel, Half Width: 14 Ga. 1. Read and understand owner's manual before operating.
2. Always wear ANSI-approved eye protection and heavy leather gloves.
Max. Thickness, Mild Steel, Full Width: 16 Ga.
3. Chamfer and deburr sharp metal edges before and after cutting.
Max. Beam Lift: 1-3/4"
4. Always keep guards in place and in working order.
Front Stop Scale Range: 0–12-1/2"
5. Secure shear to floor before using.
Rear Stop Scale Range: 0–33"
6. Always keep hands and fingers away from blade.
Weight: 982 lbs.
7. Do not exceed rated capacity of this shear.
8. Do not cut wire or nails.
9. Rotate or sharpen dull blades.
Date
10. Do not place foot under foot pedal.
11. Do not operate under influence of drugs or alcohol or when tired.
S/N
12. Prevent unauthorized use by children or untrained users; restrict
access or disable machine when unattended.
Mfd. for Woodstock in China
Model M1117 (For Machines Mfd. Since 9/21)
102
MODEL M1117
WARNING!
REF PART # DESCRIPTION
105 XM1117105 DO NOT REMOVE GUARD LABEL
106 XM1117106 TOUCH-UP PAINT, SHOP FOX WHITE
107 XM1117107 MACHINE ID LABEL
108 XM1117108 SHOP FOX NAMEPLATE SMALL
-36-
103
! WARNING!
LACERATION
AMPUTATION
HAZARD! HAZARD!
Keep hands and fingers Wear gloves while
out of blade path when handling metal and
chamfer and deburr
shearing or serious
injury will occur! sharp metal edges.
104
105
WARNING!
DO NOT REMOVE
GUARD!
106