Title Recording; Creating A Title - Hitachi VM-1800A Instruction Manual

TITLE RECORDING

disappear. "
NOTE: When the remaining recording tape time becomes less than about five minutes,
"TAPE END" flashes in the viewfinder.
TITLE RECORDING
You can easily create and record personalized titles on your videos with the
camcorder's built-in titler. The titler will store 2 different title pages in memory. Once a
title is stored, it can be displayed and recorded at any time. Each title page can contain
two lines of 16 characters each. The titler contains 47 different characters for creating
titles.
NOTE: A cassette cannot be loaded or ejected when creating a title.

Creating a title

1. Attach a power source to the camcorder and slide "POWER" switch to either "CAM"
or "VIDEO" position.
2. Press "TITLE" button. The flashing cursor will appear in the viewfinder.
" is displayed for 10 seconds after the tape starts to run.
37