Instant Review; Tape Counter - Hitachi VM-1800A Instruction Manual

INSTANT REVIEW

tape at that position.
INSTANT REVIEW
1. In record/pause (stand-by) mode, press "REVIEW" button, and the last few seconds
of the recorded scene is played back in the reverse direction and then played back in
the forward direction.
2. When the tape reaches the end of the scene you have just recorded, the camcorder
returns to the record/pause (stand-by) mode. Recording starts again when the
"REC/PAUSE" button is pressed again.

TAPE COUNTER

Load a cassette into the camcorder and perform recording or playback; the counter
indicates the amount of tape transported as a 4-digit number.
NOTES:
The tape counter does not operate when nothing is recorded on the tape.
Counter changes to 0000 when cassette is ejected.
35