Hitachi VM-1800A Instruction Manual page 18

MAKING A SAMPLE RECORDING
7. After recording, press and hold the small button on the "POWER" switch, and then
slide it to "VIDEO". The camcorder will now be in the stop mode.
8. Press "REW" button. The tape will be rewound to the beginning
9. Press "PLAY" button. The picture you just recorded will be seen through the
viewfinder.
NOTE: If you connect the camcorder to your TV, you can see the picture played back on
your TV. Refer to "VIEWING THE PICTURE PLAYED BACK ON YOUR TV" on page 38.
10. After playing, press "STOP/EJECT" button
11. Slide the "POWER" switch to "OFF" position to turn off the camcorder. Press
"STOP/EJECT" button to remove the cassette.
18