Title Recording - Hitachi VM-2300A Instruction Manual

TITLE RECORDING
The character contains 47 different characters for creating titles.
"PAGE (PLAY)" Button
"SHIFT (STOP)" Button
POWER. (ONMY.» VCR) EJECT REW PLAY F.FWD STDP STILL AUDIO, VIDEO ) TRACKING EAR
——T 'OUB-
°
© HIE O'O 0 0 ©
SHIFT
(—) and (+) Buttons
"TITLE" Button
m Creating a Title
1. Attach a power source to the camera/recorder and 5. After you have selected the first character, press
slide "POWER"
ON/OFF switch to on.
"SHIFT" button to move the flashing cursor to the
NOTE: "VCR/CAM" select switch may be "VCR"
place you want the next character.
or "CAM",
2. Press "TITLE" button. The flashing cursor will ap-
pear in the viewfinder.
i a
vad
AN
6. Repeat steps 4 and 5 until you have completed the
title.
3. Press "SHIFT" button repeatedly to move the flash-
ing cursor to the place you want to begin your title.
4. Select the first character for your title by pressing the LUCKY BOY.
(—) or (+) button repeatedly until the desired
character appears.
NOTE: Each title can contain up to one line of 16
characters each. A chart showing the characters NOTE: Character may flash, however it will be
contained in the registers is located on page 33. recorded correctly without flashing.
. After completing your title, press "PAGE" button
and create the title on another title page.
. After creating the title, press "TITLE" button to re-
move the title graphics from the viewfinder. Now
title graphics is stored in memory.
a
© "
E32