Hitachi VM-1800A Instruction Manual page 21

IDENTIFICATION AND OPERATION OF CONTROLS
the switch is set to "OUT", the "AUDIO" and "VIDEO" jacks can be used as output
jacks, and when the switch is set to "IN", they can be used as input jacks.
"RF DC OUT" Jack
Connect the RF converter unit (optional) to this jack.
5
"AUDIO/VIDEO" Jacks
These can be used as input or output jacks depending on the position of "AV OUT/IN" switch.
When using these jacks as outputs, connect the audio/video cable (supplied only with the
VM-3800A) to these jacks and to the audio and video inputs of your TV/monitor receiver. You
can also connect the RF converter unit (optional) to these jacks and your TV receiver.
Use these jacks as inputs when you supply signals from another device to your camcorder
for recording.
To open the cover:
To close the cover, first hook the onto the case.
Diagram of Buttons
"TITLE" Button
21