Operation Guide - Hisense KFR-3208GW Instruction & Installation Manual

Operation Guide

HOW TO INSTALL BATTERIES
!
NOTE
HOW TO USE THE REMOTE
CONTROL UNIT
REMOTE CONTROL UNIT
INSTALLATION POSITION
DO NOT
1. Slide the cover in the direction indicated by the arrow and remove it.
2. Install two AAA alkaline batteries. Make sure the batteries point in the direction
m arked in the battery compartment.
3. Use a thin object such as the tip of a pen to press the ACL button.
Replace the batteries when the remote control unit's display fails to light, or when the
remote control unit cannot be used to change the air conditioner's settings.
Use two fresh leak-proof type-AAA alkaline batteries.
In replacing batteries, follow the instructions as mentioned in the sub-section "How
to Install Batteries".
If you do not use the remote control unit more than 1 month, take out the batteries.
When using the remote control unit, always point the unit's transmitter head
directly at the air conditioner's receiver.
To ensure that the air conditioner operates correctly, DO NOT install the remote control
unit in the following places:
In direct sunlight
Behind a curtain or other places where it is covered
More than 8 meters away from the air conditioner
In the path of the air conditioner's airstream
Where it may become extremely hot or cold
Where it may be subject to electrical or magnetic noise
Where there is an obstacle between the remote control unit and the air conditioner
+ +
- -
- -
+ +
Air conditioner
(Indoor unit)
Remote control
unit
8
Sliding cover
Receiver
(Transmitter head)