Introduction Of Remote Control Unit - Hisense KFR-3208GW Instruction & Installation Manual

4.Introduction of the Remote control Unit 4.Introduction of the Remote control Unit
Transmitter
1 HR. TIMER button
HIGH POWER button
FLAP button
SLEEP button
A/C SENSOR button
NOTE
Transmitter
SENSOR
Display
SLEEP
button
TEMP. Setting buttons
ON/OFF operation
button
A
T E M P S E T T E M P S E T
C
1HOUR
1 Ð ¡ Ê ±
HOUR
A
ON
A
OFF
FAN
1 HR
TEMP
SPEED
FAN SPEED selector button
FLAP MODE
OFF
ON
SLEEP
SET CANCEL
A/C SENSOR ACL
ACL button
The illustration above pictures the remote control unit after the cover has
been lowered and removed.
When you press the buttons on the remote control unit,the
the display to transmit the setting changes to the receiver in the air conditioner.
A temperature sensor inside the remote control unit senses the room
temperature.
Information on the operating conditions is displayed while the remote control
unit is switched on. If the unit is turned off, only the mode that was set
previously is still displayed.
For details, see Night Setback Mode . When you press this button, in the
HEAT, DRY or COOL mode, the
control unit will automatically adjust the set temperature to save energy.
Press the button to increase the set temperature.
Press the button to reduce the set temperature.
This button is for turning the air conditioner on and off.
6
SENSOR
Display
ON/OFF button
TEMP.setting button
MODE selector button
TIMER ON/OFF button
TIMER SET/CANCEL
button
Battery compartment
(pull off the cover to expose the
batteries.)
mark appears in the display, the remote
(Cover closed)
mark appears in