Hisense KFR 2101GWE Instruction Manual page 11

Operation with the Remote Control Unit(continued)
Check that the circuit breaker on the power panel is turned on and that the operation selector of the indoor unit is
NOTE
in the ON position.
If the automatic operation settings of the unit do not meet your needs, press the setting buttons as described
below and change the settings as desired.
Press the MODE selector button and select the desired mode.
For heating operation
For dehumidifying operation
For cooling operation
STEP 1
For automatic operation
For fan operation
STEP 2
To start the air conditioner, press the ON/OFF operation button.
Press the TEMP setting button to change the temperature setting to the desired temperature .
STEP 3
Set the FAN SPEED selector button to choose the fan speed you want.
STEP 4
If the fan speed is set to
!
NOTE
according to the difference between the actual room temperature and the set temperature.
Press the FLAP button and set the airflow direction as desired.
STEP 5
To stop the air conditioner, press the ON/OFF operation button again.
1HR
ON/OFF
HIGH
POWER
FLAP
STEP 5
ON OFF
SET CANCEL
BATTERY
A/C SENSOR
Adjustable temperature range:
30℃ max. 16℃ min.
(Automatic), the fan speed switches automatically,
AUTO
C
AUTO
AUTO
TEMP
STEP 3
STEP 2
MODE
STEP 1
FAN
SPEED
STEP 4
SLEEP
ACL
AUTO
9