•
Enable Service – enable / disable the service.
•
LIFT1 Password – change the LIFT1 pre-authorization password. The password can
contain up to 19 digits. The password change will be automatically written into Lift1
password in SMS / LIFT1 and vice versa.
Caution
•
Make sure that at least one of the 081–086 parameters (operational call memory) is
set and parameter 968 (2N
make the service work properly.
5.9 Maintenance / Configuration
The Maintenance / Configuration folder helps you configure 2N
downloading, system and battery administration and acquiring system information.
®
EasyGate IP battery reports) is enabled in 2N
2N® EasyGate IP User Manual
®
EasyGate IP by file
®
Lift1 to
71 / 94