Burner Description - Riello GI/EMME 1400 Installation, Use And Maintenance Instructions

4.9

Burner description

1 Output modulator (for modulating version only)
2 Air pressure switch
3 Gas butterfly valve control rod
4 Control box reset button with lockout signal
5 Head drive rod
6 Servomotor
7 Air adjustment cam
8 Maximum gas pressure switch
9 Pipe coupling gas pressure test point
10 Gas regulator
11 Pressure adjustment eccentric on return line
12 Maximum oil pressure switch
13 Return pressure gauge
14 Delivery pressure gauge
15 Pumping unit
16 Adjustment cam
17 Pressure adjuster
18 Intake line connection
19 Return line connection
20 Delivery line connection
21 Vacuometer connection
22 Pressure gauge connection
23 Minimum oil pressure switch
24 Fan motor
– The motor relay release for versions with
starter is inside the same.
– Pump motor relay release is inside the box
next to the pumping unit.
ATTENTION
Technical description of the burner
11 GB
20161915
18 21
17
Fig. 4
20161981
22 20
Fig. 5
19
20160907