Explosion-proof IR Zoom Bullet Camera·Quick Start Guide
Ø 10
44
Figure 2-3 Dimension of a Wall Mounting Bracket Type II (mm)
Run the Device in Safe Area
2.1
It is recommended to trial run the device in the safe area before
installation.
Steps:
1. Make sure the power cable and network cable are connected
properly. Then power on the device to trial run the device.
2. Check if the image can be displayed normally. If not, contact the
technical support.
3. Start the installation after making sure the device works properly.
Note:
If the device cannot be powered up, check the cable connection
carefully.
543.5
Ø 13
10
Ø 8.5
Ø 17
96
30
6.5
*90±0.1
160