Installation - HIKVISION DS-2DB4236I-CWX Quick Start Manual

Explosion-proof IR Zoom Bullet Camera·Quick Start Guide

2 Installation

Before you start:
 Make sure the device in the package is in good condition and all
the assembly parts are included.
 Make sure your power supply matches with your camera. Refer
to specification for standard power supply of different camera
models.
 Make sure all the related equipment is power-off during the
installation.
 Check the specification of the products for the installation
environment.
 Make sure that the wall is strong enough to withstand eight
times the weight of the camera and the bracket.
Note:
Do not drag the camera with its waterproof cables as the figure
below. Otherwise the waterproof performance is affected.
Figure 2-1 Do Not Drag the Cables
8