Table of Contents
Advertisement
Explosion-proof IR Zoom Bullet Camera·Quick Start Guide
3 Setting the Network Camera over the
LAN
Note:
You shall acknowledge that the use of the product with Internet
access might be under network security risks. For avoidance of
any network attacks and information leakage, strengthen your
own protection. If the product does not work properly, contact
with your dealer or the nearest service center.
To ensure the network security of the network camera, we
recommend you to have the camera assessed and maintained
termly. You can contact us if you need such service.
Wiring
3.1
To view and configure the network camera via LAN (Local Area
Network), you need to connect the network camera in the same
subnet with your PC. Then, install the SADP or client software to
search and change the IP address of network camera.
Connect the camera to the network according to the following
figures
Network Camera
Network Cable
Figure 3-1 Connecting Directly
19
Computer
Advertisement
Table of Contents
