Table of Contents
Advertisement
MaintenanCe and
serViCing
Procedures not specifically
explained in this manual must
be performed only by a qualified
technician.
FrOM aCCidental
OperatiOn:
turn the power switch of the tool
off and unplug the tool from its
electrical outlet before
performing any inspection,
maintenance, or cleaning
procedures.
tO preVent seriOus inJurY
FrOM tOOl Failure:
do not use damaged equipment.
if abnormal noise or vibration
occurs, have the problem
corrected before further use.
Cleaning, Maintenance, and
lubrication
1.
beFOre eaCh use,
general condition of the tool. Check for
loose hardware, misalignment or binding
of moving parts, cracked or broken parts,
damaged electrical wiring, and any
other condition that may affect its safe
operation.
SKU 94560
tO preVent
seriOus inJurY
inspect the
For technical questions, please call 1‑800‑444‑3353.
2.
before each use,
Blade (68, 69). Using a dull Saw Blade
will cause excessive wear on the Motor
of the Jigsaw and will not produce a
satisfactory cut. Replace with a new
Saw Blade when needed.
3.
aFter use,
the tool with clean cloth.
4.
warning! if the supply cord of
this power tool is damaged, it must be
replaced only by a qualified service
technician.
inspect the Saw
wipe external surfaces of
Page 12
Advertisement
Table of Contents
