Maintenance And Servicing - Chicago Electric 67707 Set Up And Operating Instructions Manual

maintenance and
SerVicing
Procedures not specifically
explained in this manual must
be performed only by a qualified
technician.
from accidentaL
operation:
turn the power Switch off and
remove the Battery pack from the
tool before performing any
inspection, maintenance, or
cleaning procedures. unplug the
charger before performing any
inspection, maintenance or
cleaning procedures.
to preVent SeriouS injurY
from tooL faiLure:
do not use damaged equipment.
if abnormal noise or vibration
occurs, have the problem
corrected before further use.
1. Before each uSe,
general condition of the tool. Check for
loose screws, misalignment or binding of
moving parts, cracked or broken parts,
damaged Charger electrical wiring, and
any other condition that may affect its
safe operation. Sandpaper should not be
dull or contain excessive debris build-up.
Scraper and Cutting Blade should be
clean and sharp.
2. after uSe,
the tool with clean cloth.
3. Warning! do not use if either
the Battery pack or charger (506) are
damaged in any way.
4. dispose of Battery pack properly. do
not short, incinerate or open charger
Page 12
to preVent
SeriouS injurY
inspect the
wipe external surfaces of
for technical questions, please call 1-800-444-3353.
or Battery pack. Keep charger and
Battery pack dry.
SKU 67707