Specifications; Setup Instructions - Harbor Freight Tools 97028 Assembly And Operating Instructions Manual

understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
Construction Materials
Mounting Plate Thickness
Air Inlet Size
Activation Method
Maximum Air Pressure
Air Consumption
Blows Per Minute
Net Weight
Hose Length
When unpacking, check to make sure that the item is intact and undamaged. If
any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
read the ENTirE imPOrTaNT saFETY iNFOrmaTiON section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages, refer
to the Assembly Diagram near the end of this manual.
SKU 97028 For technical questions, please call 1-800-444-3353.
saVE THEsE iNsTruCTiONs.

sPECiFiCaTiONs

Stand/Mounting Bracket: Formed Steel
Anvil Shaft and Anvils: Machined Steel
Air Hammer: Die-Cast Aluminum
Air Hose: Black Braided Reinforced
Rubber w/Crimped Brass Fittings
11 Gauge Steel Plate
1/4" X 18 NPT (Female)
Variable Speed Remote Foot Pedal
100 PSI
90 PSI @11 SCFM
700
16.20 lb
13 ft.
uNPaCkiNg
sET uP iNsTruCTiONs
Page 6