Table of Contents
Advertisement
Specifications
Important Safety Information
WARNING Read all safety warnings
and instructions.
Failure to follow the warnings and
instructions may result in injury.
Save all warnings and instructions
for future reference.
1. Wear ANSI-approved safety goggles during use.
2. Do not use for loosening fasteners.
3. Use only within rated torque range.
4. Use as intended only. Do not use as hammer
or pry bar.
5. Do not use handle extension to increase force.
Do not use as a breaker bar.
6. Do not use a Torque Wrench that has been
dropped. Test before putting back into use.
Operation
Page 2
Torque Range
Drive
Clockwise Accuracy
Counterclockwise Accuracy ± 3%
Battery
Battery
Mode
Indicator
Preset Group
Number
Figure A: Layout
For technical questions, please call 1-888-866-5797.
12.5 - 250 ft-lb
1/2"
± 2%
3 AA (1.5V)
7. Have the Torque Wrench calibrated and
serviced only by a qualified technician.
8. Inspect before every use; do not use if
damaged or if parts are loose.
9. Keep away from children.
10. Use only sockets with the correct drive and rated
to at least the torque that will be applied to it.
11. Do not mix old and new batteries. Do not mix
alkaline, standard, or rechargeable batteries.
Position batteries in proper polarity. Do not use
swollen or leaking batteries.
12. The warnings, cautions, and instructions in this
instruction manual cannot cover all possible
conditions and situations that may occur.
It must be understood by the operator that
common sense and caution are factors which
cannot be built into this product, but must be
supplied by the operator.
Increase
Preset Button
Button
Unit
Button
Decrease
Button
Progress Lights
On/Off
Power Button
Torque or Angle
Display
Menu Button
Item 56683
Advertisement
Table of Contents
