Specifications - Harbor Freight Tools PITTSBURGH AUTOMOTIVE 56411 Owner's Manual & Safety Instructions

8. Maintain the Punch Driver Kit
with care. Keep this product clean.
Properly maintained products are
less likely to malfunction. Do not use
damaged products. Tag damaged
products "Do not use" until repaired.
9. Use only accessories that are
recommended by the manufacturer
for the specific tool model.
Accessories that may be suitable for
one product may become hazardous
when used on another product.
10. Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely
to bind and are easier to control.
11. Protect the Pressure Hose.
Do not drop heavy objects on
the Hose. Avoid kinks in the Hose.
Maintain proper clearance to avoid
damage to the Hose and Coupler.
12. Maintain labels and nameplates.
These carry important information. If
unreadable or missing, contact Harbor
Freight Tools for a replacement.

Specifications

Maximum Capacity
Punching
Force
Item 56411
SAVE THESE INSTRUCTIONS.
For technical questions, please call 1-888-866-5797.
13. Use the right product for the job.
There are certain applications for
which this product was designed.
Do not use small products to do the
work of larger industrial products. Do
not use this product for a purpose
for which it was not intended.
14. Tool service must be performed
only by a qualified service
technician. Service or maintenance
performed by unqualified personnel
could result in a risk of injury.
15. When servicing the Punch Driver
Kit, use only identical replacement
parts. Use only authorized parts.
16. Keep children and bystanders away
while operating a tool. Distractions
can cause you to lose control.
17. The warnings, cautions, and instructions
discussed in this instruction manual
cannot cover all possible conditions
and situations that may occur. It must
be understood by the operator that
common sense and caution are factors
which cannot be built into this product,
but must be supplied by the operator.
11 Gauge (for mild carbon steel)
16 Gauge (for stainless steel)
10 Ton (20,000 lb.)
Page 3