Page 2
Use eye protection. Always wear ANSI approved impact safety goggles when using this product. Approved goggles are available from Harbor Freight Tools. Do not overreach. Keep proper footing and balance at all times when using this product SKU 91670 For technical questions, please call 1-800-444-3353.
Page 3
When unpacking, check to make sure the following parts are included that are listed on Page 5. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual. Assembly Instructions You must first load staples (not included) into the Hammer Tacker.
Page 4
ANSI approved safety goggles when removing jammed staples. Repeat loading instructions on Page 3. Test on scrap material to see if Hammer Tacker will work correctly after this repair. See Figure E. Needle Nose Plier Figure E SKU 91670 For technical questions, please call 1-800-444-3353. Page 4...
Page 5
ORIGINAL PRODUCT OR REPLACEMENT PARTS THERE TO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERE TO. NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 91670 For technical questions, please call 1-800-444-3353. Page 5...