Download
Share
Print this page
Harbor Freight Tools Bauer 21506C-B Owner's Manual & Safety Instructions
  1. Manuals
  2. Brands
  3. Harbor Freight Tools Manuals
  4. Tools
  5. Bauer 21506C-B
  6. Owner's manual & safety instructions

Harbor Freight Tools Bauer 21506C-B Owner's Manual & Safety Instructions

Hide thumbs

Advertisement

Quick Links

Download this manual
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
For Best Results,
Use 3.0 Amp Hour Battery
(Sold Separately)
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2021 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
21j

Advertisement

loading
Need help?

Need help?

Do you have a question about the Bauer 21506C-B and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Harbor Freight Tools Bauer 21506C-B

Summary of Contents for Harbor Freight Tools Bauer 21506C-B

  • Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.

  • Page 2: Table Of Contents

    Table of Contents Safety ............2 Maintenance ..........11 Specifications ..........6 Parts List and Diagram ......12 Setup ............6 Warranty ............ 15 Operation ............ 8 WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

  • Page 3: Safety

    2. Electrical safety e. Prevent unintentional starting. Ensure the switch is in the off-position before connecting a. Power tool plugs must match the outlet. to power source and/or battery pack, picking Never modify the plug in any way. Do not use up or carrying the tool.
  • Page 4 Maintain labels and nameplates on the tool. in the instructions for use and care. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Page 4 For technical questions, please call 1-888-866-5797. Item 58608...
  • Page 5 7. Lithium Battery Safety Warnings The battery Charger gets hot during use. The Charger’s heat can build up to unsafe levels and create a fire hazard if it does not receive adequate ventilation, due to an electrical fault, or if it is used in a hot environment.

  • Page 6: Specifications

    Specifications Battery Type 20V Bauer Li-ion (64816, 57007) Charger Type 20V Bauer Li-ion (57006) Maximum Pressure 10,000 PSI Grease Cartridge Capacity 14.5 oz. Maximum Flow Rate 5 oz/min. Hose Outlet Threads (Tool) 7/16 UNEF Hose Outlet Threads 1/8" NPT (Coupler Side) Outlet Threads (Filler Port) 1/8″...
  • Page 7 Variable Speed Trigger The tool will produce a higher volume of grease as more force is placed on the Variable Speed Trigger. To unlock the Trigger for use, press Trigger Lock in from the left side of tool. Trigger Lock Trigger LED Light The LED light is activated by pulling the Trigger and will automatically shut off after 20 seconds of use.

  • Page 8: Operation

    Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Work Area Set Up 1. Designate a work area that is clean and well lit. 2.
  • Page 9 Clearing Contaminants Note: Contaminants can be pulled into the tool and clog 2. Remove the Bolt and Washer from the Check Valve and pull Trigger for 15 seconds. the valve. See Troubleshooting section on page 11 for contamination causes. To clear any contamination: 3.
  • Page 10 General Instructions for Use TO PREVENT SERIOUS INJURY FROM INJECTION: Wear ANSI-approved eye protection and heavy-duty work gloves during use. 1. Make sure that the Trigger is in the 6. Squeeze the Trigger several times or off-position, then attach the Battery Pack. until a small amount of grease begins to flow out of the greased bushing.

  • Page 11: Maintenance

    Maintenance and Servicing Instructions Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Make sure that the Trigger is locked and Battery Pack is removed before performing any procedure in this section. TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment.

  • Page 12: Parts List And Diagram

    PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
  • Page 13 Assembly Diagram Item 58608 For technical questions, please call 1-888-866-5797. Page 13...
  • Page 14 Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175442215 when ordering parts. Page 14 For technical questions, please call 1-888-866-5797.

  • Page 15: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
  • Page 16 26677 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797...