Harbor Freight Tools 90360 Assembly And Operating Instructions

4” milling swivel machine vise

Download this manual

4" MILLING SWIVEL

MACHINE VISE

9 0 3 6 0

ASSEMBLY AND OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

this manual or any artwork contained herein may be reproduced in any shape

or form without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353

Page 1 . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353...
Page 2 Wear a full face shield if you are producing metal filings or wood chips. Wear an ANSI approved dust mask or respirator when working around metal, wood, and chemical dusts and mists. Do not overreach. Keep proper footing and balance at all times. SKU 90360 Page 2...
Page 3 Unpacking When unpacking, check to make sure the parts listed on page 5 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
Page 4 4. When you are finished, turn the Handle (#12) counterclockwise to loosen the Jaws. Do not over tighten. Maintenance 1. For better and safer perfomance keep all of the Vise parts clean and dry at all times. SKU 90360 Page 4...
Page 5: Parts List
REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 90360 Page 5...