ABB ACS880 Manual page 32

Hide thumbs Also See for ACS880:

Table of Contents

32 Start-up

Insert the FEN-11 module into a free slot (1...3) on the control unit.

Connect the encoder cable according to the encoder data sheet and the FEN-11 manual.

Connect the cable plug to X42 on the FEN-11.

Switch on the power to the inverter control unit.

Activate the encoder interface module in parameter 91.11 Module 1 type. Select the

slot in 91.12 Module 1 location.

Set the encoder parameters in group 92 Encoder 1 configuration.

Table of Contents