Advertisement
STEP 2:
Orient and align the Bottom Plat (2) in-line
with the Panel mounting holes, and bring the
panels exactly in-line with them, and slip-in
the Mounting The Screw M8x30 (7) 4 off and
Bush M8 18x10 (4) 4 off, on each side and
secure the threads.
Copyright By SRC
Design and Specification are subjected to change
MOUNTING INSTALLATION
STEP 1:
The Driver seat must be moved up (as shown
in the drawing
Unscrew the Mounting screws (4 off), as
shown in the drawing, and take out
2
Page 3
Advertisement
