Usb Charging; Cleaning And Maintenance; Specifications - Dcybel SKYLINE Instruction Manual

USB CHARGING

On the top of the speaker there is a USB
CHARGING port. You can connect any USB
charging cable (not supplied) to it and use the
speaker as an external battery pack for charging.
Note: Make sure the speaker is powered on to
charge devices (charge at 5V, 2.1A).
LISTENING TO AUXILIARY SOURCE
1. Plug one end of the supplied audio cable into the headphone
jack on your device.
2. Plug the other end of the audio cable into the AUX jack on top
of the speaker.
3. Press to turn ON the speaker.
4. Repeatedly press SOURCE until the AUX indicator light
illuminates GREEN.
5. Use your device's audio controls for music playback.
• Note: only the volume buttons
speaker or the remote control are operational when a
device is plugged into the AUX jack.
6. To stop playback, disconnect your device from the AUX jack.

CLEANING AND MAINTENANCE

Switch off and disconnect the unit from the mains socket before cleaning and
maintenance.
Clean the unit with a soft, slightly damp cloth and wipe it with a dry cloth.
Never immerse it in water.
Do not use abrasive or chemical cleaning agents.

SPECIFICATIONS

Frequency range:
Power supply:
Power consumption:
and
FM: 87.5 MHz – 108 MHz
DC 18V, 3.2A
60W
EN-7
on the