Charging The Speaker - Dcybel Dance Instruction Manual

Accessories
Micro USB cable
3.5 mm audio cable
When the USB cable is used as the disconnect device,
the disconnect device shall remain readily operable.
The marking plate is located at the side of the apparatus.

CHARGING THE SPEAKER

The speaker has a built-in Lithium battery. It is
recommended to charge the internal battery for about 3
hours before using the speaker.
The fully-charged battery can give up to 5-hour playing
time (based on 25% volume on speaker without LED).
1. Connect the micro USB plug end of the supplied cable to
the charging port on the back of the speaker. Connect the
standard USB plug end of the cable into the USB port on
your computer or other USB charging device.
• The indicator light will illuminate red.
2. When the battery is fully charged, the red indicator light
will go out.
3. After charging, remove the micro USB cable.
Low battery warning:
When you hear two beeps and notice that the indicator light
is flashing red 3 times every 15 seconds, please recharge the
speaker.
EN-3
Carry strap