Charging The Speaker - Dcybel Smart Instruction Manual

readily operable.
The marking plate is located at the bottom of the
apparatus.

CHARGING THE SPEAKER

The speaker has a built-in Lithium battery. It is
recommended to charge the internal battery for
about 3 hours before using the speaker.
The fully-charged battery can give up to 5-hour
playing time depending on genres of music and
volume.
1. Connect the small end of the supplied micro USB
cable into the charging port of the speaker.
Connect the other end of the cable into the USB
port on your computer.
The indicator light will illuminate red.
2. When the battery is fully charged, the red indicator
light will go out.
3. After charging, remove the micro USB cable.
Low battery warning: When you hear beeps, please
recharge the speaker.
PARING WITH A BLUETOOTH-
ENABLED DEVICE
1. Press and hold
seconds to turn on the speaker.
The speaker will enter Bluetooth mode and
for about 3
EN-4