Inventory - Grizzly G0513X2B Manual

Bandsaw w/motor brake manual insert
Hide thumbs Also See for G0513X2B:
Table of Contents

Advertisement

Inventory

After all the parts have been removed from the
crate, you should have the following items:
Crate Contents (Figure 7 & 8):
A. Bandsaw (not shown) ................................. 1
B. Table ........................................................... 1
C. Miter Gauge ................................................ 1
D. Back Square Tube ...................................... 1
E. Resaw Fence ............................................. 1
F.
Front Rail ................................................... 1
G. Fence Assembly ......................................... 1
Hardware and Tools:
Eye Bolt M10-1.5 (may be installed) .......... 1
Flat Washers 8mm
(Table, Pos. Stop, Fence) .......................... 7
Lock Washers 8mm (Table) ....................... 4
Hex Bolts M8-1.25 x 16 (Table) ................. 4
Hex Bolt M8-1.25 x 90 (Pos. Stop) ............ 1
Hex Nuts M8-1.25 (Pos. Stop, Fence) ....... 2
Table Pin .................................................... 1
Table Insert ................................................ 1
Cap Screws M6-1 x 16 (Fence) ................. 2
Hex Bolts M6-1 x 20 (Fence) ..................... 2
Fence Handle M8-1.25 x 22 (Fence) ......... 1
Lock Washers 6mm (Fence) ...................... 2
Flat Washers 6mm (Fence) ........................ 2
Rail Pad M6 x 18 (Fence) .......................... 1
Hex Nut M6-1 (Fence) ................................ 1
Lock Handle M8-1.25 x 44 (Fence) ............ 1
Moving Plate (Fence) ................................. 1
Hex Wrench 5mm & 8mm .....................1 Ea
Open End Wrench 10 x 13mm ................... 1
G0513X/G0514X/G0514X3 Extreme Series Bandsaw
B
Qty
Figure 7. Bandsaw components.
Qty
F
Figure 8. Fence components.
In the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or for the sake of expedi-
ency, replacements can be obtained at your local
hardware store.
Some hardware/fasteners on the inventory
list may arrive pre-installed on the machine.
Check these locations before assuming that
any items from the inventory list are miss-
ing.
C
D
NOTICE
E
D
G
-17-

Advertisement

Table of Contents
loading

Table of Contents