Table of Contents
Advertisement
Blade Speed
The blade speed can be adjusted to 1700 or 3500
FPM. Speed adjustments are made by moving
the V-belt position on the motor and wheel pul-
leys.
Most woodcutting can be performed successfully
at the higher blade speeds. Slower blade speeds
generally produce better results when cutting
hardwoods, intricate curves, or when an excep-
tionally smooth cut is desired.
To adjust the blade speed:
1.
DISCONNECT BANDSAW FROM POWER!
2.
Loosen the motor mount cap screws shown
in Figure 47 and rotate the motor to loosen
the V-belt.
G0513X/G0514X/G0514X3 Extreme Series Bandsaw
3.
Refer to Figure 48 to locate the correct V-
belt position for the desired blade speed.
�������
�����
��������
Figure 48. V-belt speeds.
3
4
����������
Figure 49. V-belt deflection.
��������
�����
�����
�������
�����
�����
�����
-39-
Advertisement
Table of Contents
