Grizzly G0513X2B Manual page 9

Bandsaw w/motor brake manual insert
Hide thumbs Also See for G0513X2B:
Table of Contents

Advertisement

(Replaces Inventory
on Page 17)
The following is a description of the main compo-
nents shipped with your machine. Lay the compo-
nents out to inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
crate contents (figure 2):
a. Bandsaw (not shown) ................................. 1
b. table w/table insert ................................... 1
c. Miter gauge ................................................ 1
d. resaw Fence ............................................. 1
e. Front square rail ...................................... 1
f.
Fence Assembly ......................................... 1
g. guide post handwheel............................... 1
B
g
F
figure 2. g0513X2B inventory.
Model g0513X2B (Mfg. since 5/11)
hardware and tools:
Qty
If you cannot find an item on this list, care-
fully check the machine and the packaging
materials. Some of these items may be pre-
installed for shipping or become misplaced
during unpacking.
C
d
e
eye Bolt M10-1.5 (may be installed) ........... 1
hex Bolts M8-1.25 x 25 (table) .................. 4
Flat Washers 8mm (table, Fence, rail) ..... 8
lock Washers 8mm (table, rail) ............... 5
lock Washers 6mm (rail) .......................... 3
Flat Washers 6mm (rail) ............................ 3
Cap screws M6-1 x 20 (rail) ..................... 3
Cap screw M8-1.25 x 20 (rail) .................. 1
Knobs M8-1.25 x 20 (rail) .......................... 2
hex Bolt M8-1.25 x 90 (pos. stop) ............. 1
hex nuts M8-1.25 (pos. stop, Fence) ........ 2
lock handle M8-1.25 x 44 (Fence) ............ 1
Moving plate (Fence).................................. 1
table pin..................................................... 1
rail plates ................................................. 3
hex Wrench 5mm & 8mm .....................1 ea
open end Wrench 10 x 13mm ................... 1
NOTICE
Qty
-9-

Advertisement

Table of Contents
loading

Table of Contents