Deka unigy II SPACESAVER Non-Interlock AVR 45 AH Installation And Operation Manual page 15

4CU / 6CU CONNECTOR PACKAGE
(double connector)
5. Install side terminal plate to terminal plate bracket using 1/4-20
x 1.00" hardware. Bolts should be installed loosely for future
adjustments.
6. Connect side terminal plate to side terminal plate connectors.
Bolt length is dependent on connector package as noted below.
1CU / 2CU CONNECTOR PACKAGE
(1/4-20 x 1.00" hardware required)
4CU / 6CU CONNECTOR PACKAGE
(1/4-20 x 1.25" hardware required)
7. After all parts are installed and alignment is confirmed, safety
shield bracket hardware should be tightened, but not torqued.
All remaining hardware should be torqued Consult "Hardware
Torque Requirements" (pg b.4) for proper torque values.
8. Install side terminal shield to side terminal plate Bracket using
1/4-20 x 0.625" screws. Tighten but do not torque hardware.
b.15
FINAL ASSEMBLY