Deka unigy II SPACESAVER Non-Interlock AVR 45 AH Installation And Operation Manual page 12

3. Install terminal plate to battery posts using 1/4-20 hardware
(consult battery string layout diagram & parts kit for specific
length).
4. Attach terminal plate to terminal plate bracket. Note position of
terminal plate. Terminal plate bracket may have to be moved in
order to be flush with the terminal plate.
5. After confirming alignment safety shield bracket hardware
should be tightened, but not torqued. All remaining hardware
should be torqued. Consult "Hardware Torque Requirements"
(pg. b.4) for proper torque values.
6. Assemble the four parts of the top terminal safety shield as
detailed below.
b.12