Nortel DMS-100 Series Replacement Procedures page 2

March 2005
Standard release 17.07 for software release SN08 (DMS). No changes have been made for
SN08 (DMS) features.
Volume 7
New procedure – Backplane replacement, "NTRX4002 in NTRX40AA" due to CR
Q01166307.
March 2005
Standard release 17.06 for software release SN08 (DMS). This release is current for the
SN08 (DMS) software release, although no changes have been made for SN08 (DMS)
features.
Volume 3
Modified procedure – Replacing processor and memory cards in an XPM (step 26). This
change corrects the re-direction from step 26, and is due to CR Q01047311.
December 2004
Standard release 17.05 for software release SN07 (DMS).
Volume 7
New procedure for CR Q00840334 – NTMX82 in a DTCO2
September 2004
Standard release 17.04 for software release SN07 (DMS). This release is current for the
SN07 (DMS) software release, although no changes have been made for SN07 (DMS)
features.
Volume 2
Modified procedure - Bus interface cards in an LCD
Modified procedure - NTBX71 in an LCME
Modified procedure - NT9X30 in an LPP LIS
Volume 3
Modified procedure - NT2X70 in an XPM
Volumes 5
All of the changes below are due to CR Q00855532:
Modified procedure - NT6X40 in an SMA
Modified procedure - NT6X40 in an SMA-MVI-20
Modified procedure - NT6X40 in an SMA2
Publication History